Problem :- Factory Default Config not Loading after request system reset command
Admin@INTERNET-CPE-cli> show interfaces brief
NAME MAC OPER ADMIN TENANT VRF IP
---------------------------------------------------------------------------
eth-0/0 00:0c:29:83:5f:8f up up 0 global 10.195.224.10/17
vni-0/0 00:0c:29:83:5f:b7 down down - -
vni-0/1 00:0c:29:83:5f:99 down down - -
vni-0/2 00:0c:29:83:5f:c1 down down - -
vni-0/3 00:0c:29:83:5f:a3 down down - -
vni-0/4 00:0c:29:83:5f:85 down down - -
vni-0/5 00:0c:29:83:5f:ad down down - -
Solution :- Usually by default command request system reset load default config, but sometime due to some interrupts it fail to load default config but if it faills please use below steps :-
CPE-cli(config)% load merge /opt/versa/etc/bootcfg/default-device.cfg
[edit]
admin@INTERNET-CPE-cli(config)% commit
Commit complete.
Verify Default config
admin@INTERNET-CPE-cli> show interfaces brief
NAME MAC OPER ADMIN TENANT VRF IP
------------------------------------------------------------------------------------------------
eth-0/0 00:0c:29:83:5f:8f up up 0 global 10.195.224.10/17
tvi-0/0 n/a up up - -
tvi-0/0.0 n/a up up 1 Versa-Provider-Control-VR
tvi-0/1 n/a up up - -
tvi-0/1.0 n/a up up 1 Versa-Provider-Control-VR
vni-0/0 00:0c:29:83:5f:b7 up up - -
vni-0/0.0 00:0c:29:83:5f:b7 up up 1 WAN1-Transport-VR
vni-0/0.1 00:0c:29:83:5f:b7 up up 1 WAN1-Transport-VR
vni-0/1 00:0c:29:83:5f:99 up up - -
vni-0/1.0 00:0c:29:83:5f:99 up up 1 global 192.168.1.1/24
vni-0/2 00:0c:29:83:5f:c1 up up - -
vni-0/2.0 00:0c:29:83:5f:c1 up up 1 WAN1-Transport-VR
vni-0/2.1 00:0c:29:83:5f:c1 up up 1 WAN1-Transport-VR
vni-0/3 00:0c:29:83:5f:a3 down down - -
vni-0/4 00:0c:29:83:5f:85 down down - -
vni-0/5 00:0c:29:83:5f:ad up up - -
vni-0/5.0 00:0c:29:83:5f:ad up up 1 WAN1-Transport-VR
vni-0/5.1 00:0c:29:83:5f:ad up up 1 WAN1-Transport-VR
[ok][2018-12-05 14:28:27]
[edit]
admin@INTERNET-CPE-cli(config)%