Steps on how to enable Core-Anchoring to exclude woker-thread-0 from participating in data-path. 


(i)
Administrator@Master-Director% set devices template <Device/General-service-template> config system core-profile default-profile core-class core-classes cc0 wt-list [ wt0 ]

Administrator@Master-Director% set devices template <Device/General-service-template> config system core-profile default-profile core-class core-classes cc1 wt-list [ wt1 wt2 wt3 wt4 wt5 wt6 wt7 wt8 wt9 wt10 wt11 wt12 wt13 wt14 wt15 wt16 wt17 wt18 ]

Administrator@Master-Director% set devices template <Device/General-service-template> config system core-profile default-profile core-class core-classes cc2 wt-list [ wt1 wt2 wt3 wt4 wt5 wt6 wt7 wt8 wt9 wt10 wt11 wt12 wt13 wt14 wt15 wt16 wt17 wt18]

Administrator@Master-Director% set devices template <Device/General-service-template> config system core-profile default-profile core-class core-classes cc3 wt-list [ wt1 wt2 wt3 wt4 wt5 wt6 wt7 wt8 wt9 wt10 wt11 wt12 wt13 wt14 wt15 wt16 wt17 wt18 ]

Administrator@Master-Director% show | compare

Administrator@Master-Director% commit and-quit

(ii)


(iii) Commit the template to the appliance.

(iv) If the traffic is moved to the standby CSG, then you can move the traffic back to the active and monitor the traffic. If not any new sessions landing on this CSG will hit the updated core-profile.