SLA monitoring allows Versa Operating System devices to monitor the performance of the paths between each pair of branches.

Sometime the Local WAN link missing from the SLA monitor status. This caused due to the misconfiguration on the CPE.

Either the VOS have configured manually(Without using workflow) or delete the configuration.

To populate the Local WAN link on SLA monitor status, you need to follow the below steps.

>Find the local WAN Link you are using.

>Configure the circuit-name under system to populate the Local WAN Link.

admin@DuealCPE1-cli(config)% set system sd-wan site wan-interfaces vni-0/1.0 inet circuit-name inet