This article shows how to onboard a Branch Device using Versa Director.

Please refer to the reference deployment architecture here

Please note that this creates a kind of soft staging for the branch device and provides site/device specific values to be pushed to Branch device when we perform Zero Touch provisioning (ZTP).

Step 1: After logging into Versa Director GUI using appropriate credentials navigate to

Director>Configuration> Devices> Click on Add Button.

Step 2 :

Enter the Branch Name, Select the Organization Name.

Enter the Serial Number, Select the Device Group Name.

NOTE: In case of Whitebox/hardware enter the serial number of the VOS device as the chassis ID 

Step 3 :

Enter the Location details and click on Get Coordinates button.

Step 4.

Key in all the IP address, in this case 103.231.208.45/30 and 103.231.208.41/30:It is the Wan IP address of the Branch (Branch WAN interface towards the MPLS).

192.168.1.1/24: It is the Lan IP address of the Branch..( Branch LAN interface towards the Host).

103.231.208.46 and 103.231.208.42 : It is the MPLS router interfaces IP’s (MPLS Router interfaces towards the Branch).

Click on Validate Template Button.

Step 5 :

And then click on Deploy

Click on the Task button on the top right side on the Screen and see the progress.

Once it is deployed, the status will be as below.